SW-224-PIN Datasheet, PDF (2/3 Pages) Tyco Electronics – GaAs SPDT Switch, DC - 2 GHz

SW-224-PIN / SW-225-PIN
GaAs SPDT Switch,
DC - 2 GHz
Rev. V3
Electrical Specifications: T_A = -55°C to +85°C ¹
Parameter
Test Conditions
Frequency
Units Min
Typ
Max
Insertion Loss
—
DC - 2 GHz
dB
0.8
—
—
DC - 1 GHz
dB
0.7
—
—
DC - 0.5 GHz
dB
0.7
—
—
VSWR
Isolation
IP₂
—
DC - 2 GHz
Ratio
—
—
1.5:1
DC - 1 GHz
Ratio
—
—
1.25:1
DC - 0.5 GHz
Ratio
—
—
1.15:1
—
DC - 2 GHz
dB
30
—
—
DC - 1 GHz
dB
35
—
—
DC - 0.5 GHz
dB
40
—
—
For two tone input power up to +13 dBm
0.5 - 2 GHz
dBm
—
+68
—
0.05 GHz
dBm
—
+62
—
IP₃
For two tone input power up to +13 dBm
0.5 - 2 GHz
dBm
—
+46
—
0.05 GHz
dBm
—
+40
—
Trise, Tfall
Ton, Toff
Transients
1 dB Compression
50% CTL to 90/10% RF
In-band
Input Power
—
nS
—
10
—
—
nS
—
150
—
—
mV
—
15
—
0.5 - 2 GHz
dBm
—
+27
—
0.05 GHz
dBm
—
+21
—
Bias Power
+5 VDC
-5 VDC
—
mA
—
—
1
—
mA
—
—
1
1. All specifications apply when operated with bias voltages of +5VDC and –5VDC and 50 ohm impedance at all RF ports.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.