SW-164-PIN Datasheet, PDF (2/3 Pages) Tyco Electronics – Matched SP4T RF Switch, 20 - 1500 MHz

SW-164-PIN
Matched SP4T RF Switch,
20 - 1500 MHz
Electrical Specifications: T_A = -55°C to +85°C ¹
Rev. V3
Parameter
Test Conditions
Frequency
Units Min
Typ
Max
Insertion Loss
VSWR
Isolation
Ton
Toff
Transients
1 dB Compression
—
—
—
In-band
Input Power
20 - 1500 MHz
dB
—
—
2.0
20 - 1000 MHz
dB
—
—
1.5
30 - 500 MHz
dB
—
—
1.2
20 - 1500 MHz
Ratio
—
20 - 1000 MHz
Ratio
—
30 - 500 MHz
Ratio
—
—
1.80:1
—
1.50:1
—
1.25:1
20 - 1500 MHz
dB
35
—
—
20 - 1000 MHz
dB
40
—
—
20 - 500 MHz
dB
50
—
—
—
µS
—
3.0
—
—
µS
—
1.5
—
—
mV
—
40
—
20 - 1500 MHz
dBm
—
+5
—
50 - 1500 MHz
dBm
—
+15
—
IP₂
For two tone input power up to +5 dBm
20 - 1500 MHz
dBm
—
+55
—
50 - 1500 MHz
dBm
—
+70
—
IP₃
For two tone input power up to +5 dBm
20 - 1500 MHz
dBm
—
+25
—
50 - 1500 MHz
dBm
—
+40
—
Bias Power
+9 to +15 VDC @ 50 mA Max
-5 VDC ± 5% @ 25 mA Max
—
mW
—
550
—
1. All specifications apply when operated with bias voltages of +12 VDC and –5 VDC (± 5%) and 50 ohm impedance at all RF
ports.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.