SMG2_15 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – Voltage Controlled Attenuator Module

G2 / SMG2
Voltage Controlled Attenuator Module
5 - 2000 MHz
Absolute Maximum Rantings^2,3
Parameter
Short Term RF Input Power
(1 minute max.)
Peak Power (3 µs max.)
Absolute Maximum
200 mW
1W
DC Voltage
18 V
DC Bias Voltage
“S” Series Burn-In
Temperature
Case Temperature
10 V
+125°C
+125°C
Storage Temperature
-62°C to +125°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. MACOM does not recommend sustained operation near these
survivability limits.
Rev. V4
Ordering Information
Part Number
Package
G2
TO-8
SMG2
MAAM-007987-000CG2
Surface Mount
SMA Connectorized¹
1. The Connectorized version is not RoHS compliant.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
Typical Performance Curves
Attenuation vs. Control Voltage
Attenuation vs. Control Voltage vs. Frequency
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support