MEST2G-100-20-CM33 Datasheet, PDF (2/7 Pages) M/A-COM Technology Solutions, Inc. – Pin Diode Switch Element

MEST2G-100-20-CM33
Pin Diode Switch Element
Absolute Maximum Ratings^1,2
Parameter
Breakdown Voltage (V_R)
Forward Current (I_FDC)
Thermal Resistance (θ_JC)
Junction Temperature (T_J)
Storage Temperature (T_STG)
Mounting Temperature (T_MTG)
Absolute Maximum
500 V
500 mA
18°C/W
-40°C to 175°C
-55°C to +150°C
+260°C per
JEDEC STD-J-20C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. MACOM does not recommend sustained operation near these
survivability limits.
Rev. V1
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these Class 0 (HBM)
devices.
Typical Performance Curves: T_A = 25°C, Z_O = 50 Ω, -10 dBm Small Signal
Insertion Loss
Isolation
Input / Output Return Loss
Series Resistance vs. Current , 500 MHz
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support