MAOC-009872 Datasheet, PDF (2/5 Pages) M/A-COM Technology Solutions, Inc. – Voltage Controlled Oscillator 11.0 - 11.8 GHz Low Phase Noise

MAOC-009872
Voltage Controlled Oscillator
11.0 - 11.8 GHz
Electrical Specifications: T_A = +25°C, V_CC = V_BUFFER = 5 V³, Z₀ = 50 Ω
Parameter
Test Conditions
Units
Output Power
RF Port, 11.0 - 11.8 GHz
RF/2 Port, 5.5 - 5.9 GHz
dBm
SSB Phase Noise
Harmonics/Subharmonics
V_CC=V_BUFFER=V_TUNE=5V
Pulling
(Sensitivity to Match)
V_CC=V_BUFFER=V_TUNE=5V
Pushing
(Sensitivity to Supply Voltage)
Frequency Drift Rate
(Sensitivity to Temperature)
RF Port, 10 kHz Offset
RF Port, 100 kHz Offset
RF Port, ¹/₂ F_o
RF/2 Port, 2F_o
RF Port, VSWR = 1.95:1 to 2.25:1
RF Port, V_TUNE = 5 V
RF/2 Port, V_TUNE = 5 V
RF Port, 11.0 - 11.8 GHz
RF/2 Port, 5.5 - 5.9 GHz
dBc/Hz
dBc
MHz pk-pk
MHz/V
MHz/ºC
Output Return Loss
RF Port, 11.0 - 11.8 GHz
RF/2 Port, 5.5 - 5.9 GHz
dB
Tuning Sensitivity @ RF Port
Supply Current
Tune Voltage
Tuning Current Leakage
V_TUNE=5 V
I _TOTAL (I_CC + I_BUFFER)
I_CC
I_BUFFER
V_TUNE
V_TUNE=13 V
GHz/V
mA
V
µA
3. VCO can operate over the 4.75 V to 5.25 V supply voltage range.
Min.
5
2
—
—
—
—
—
—
—
—
—
—
2
—
Rev. V1
Typ.
7
5
-83
-112
20
9
Max.
—
—
—
11.0
—
5
2.5
—
0.8
0.5
—
-3
-5
—
0.19
—
165
195
145
165
20
30
—
13
5
10
Absolute Maximum Ratings ^4,5
Parameter
Absolute Maximum
Supply Voltage
(V_CC & V_BUFFER)
V_TUNE
Storage Temperature
+5.5 Vdc
0 to +15 Vdc
-55ºC to +150ºC
Operating Temperature⁶
-40ºC to +85ºC
Case Temperature (T_C)
(measured @ exposed pad)
+100ºC
Junction Temperature⁷
+135ºC
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1B devices.
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology does not recommend sustained
operation near these survivability limits.
6. Operating @ T_C ≤ +85ºC will ensure MTBF > 2.5 x 10⁶ hours.
7. Junction Temperature (T_J) = T_C + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 35° C/W.
ESD Rating: 1B
a) For T_C = 25°C, T_J = 53.9°C @ 5 V, 165 mA
b) For T_C = 85°C, T_J = 114.8°C @ 5 V, 170 mA
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.