MAOC-009266-PKG003_2 Datasheet, PDF (2/5 Pages) M/A-COM Technology Solutions, Inc. – Voltage Controlled Oscillator

MAOC-009266-PKG003
Voltage Controlled Oscillator
10.2 - 11.3 GHz
Electrical Specifications: T_A=+25°C, V_CC = V_BUFFER = 5.0 V³, Z₀ = 50 Ω
Rev. V1
Parameter
Test Conditions
Output Power
RF Port, 10.2 - 11.3 GHz
RF/2 Port, 5.10 - 5.65 GHz
SSB Phase Noise
V_CC=V_BUFFER=V_TUNE=5V
Harmonics/Subharmonics
V_CC=V_BUFFER=V_TUNE=5V
RF Port, 10 KHZ Offset
RF Port, 100 KHZ Offset
RF Port, ¹/₂ F_o
RF Port, 2 F_o
Pulling
(Sensitivity to Match)
V_CC=V_BUFFER=V_TUNE=5V
RF Port, VSWR = 1.95:1 to 2.25:1
Pushing
(Sensitivity to Supply Voltage)
RF Port, V_TUNE = 5 V
RF/2 Port, V_TUNE = 5 V
Frequency Drift Rate
(Sensitivity to Temperature)
RF Port, 10.2 - 11.3 GHz
RF/2 Port, 5.10 - 5.65 GHz
Output Return Loss
RF Port, 10.2 - 11.3 GHz
RF/2 Port, 5.10 - 5.65 GHz
Tuning Sensitivity @ RF Port
V_TUNE = 5 V
Supply Current
I _TOTAL (I_CC + I_BUFFER)
I_CC
I_BUFFER
Tune Voltage
V_TUNE
Tuning Current Leakage
V_TUNE = 13 V
3. VCO can operate over the 4.75 V to 5.25 V supply voltage range.
Units
dBm
dBc/Hz
dBc
Min.
5
1
—
—
Typ.
9
5
-87
-114
20
9
Max.
—
—
—
MHz pk-pk —
11.0
—
MHz/V
—
20
0.5
—
MHz/ºC
—
0.8
0.5
—
dB
—
-4
-9
—
GHz/V
—
0.18
—
185
205
mA
—
165
175
20
30
V
1
—
13
µA
—
5
10
Absolute Maximum Ratings ^4,5,6
Parameter
Supply Voltage
(V_CC & V_BUFFER)
V_TUNE
Storage Temperature
Operating Temperature
Case Temperature (T_C)
(measured @ exposed pad)
Junction Temperature⁷
Absolute Maximum
+5.5 Vdc
0 to +15 Vdc
-55ºC to +150ºC
-40ºC to +85ºC
+100ºC
+135ºC
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology does not recommend sustained
operation near these survivability limits.
6. Operating @ T_C ≤ +85ºC will ensure MTBF > 2.5 x 10⁶ hours.
7. Junction Temperature (T_J) = T_C + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 35° C/W.
a) For T_C = 25°C, T_J = 57.4°C @ 5 V, 185 mA
b) For T_C = 85°C, T_J = 118.3°C @ 5 V, 190 mA
ESD Rating: Class 1A
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.