MAMF-011038 Datasheet, PDF (2/8 Pages) M/A-COM Technology Solutions, Inc. – Lead Free 2 mm 12-lead STQFN package

MAMF-011038
Integrated SPDT Switch and LNA with Bypass Mode
5 - 6 GHz
Rev. V1
Electrical Specifications: Freq. = 5.25 - 5.825 GHz, V_DD = 3 V, V_C = 0/2.8 V, T_A = 25°C
Parameter
Test Conditions
Units Min. Typ. Max.
Isolation
T_X Insertion Loss
RFC to T_X
RFC to R_X (Gain Mode)
RFC to R_X (Bypass Mode)
RFC to T_X
19
dB
—
19
—
19
dB
—
0.9
1.2
T_X Input / Output Return Loss
RFC to T_X
dB
—
22
—
T_X Input P0.1dB
T_X EVM
T_X Path On
P_IN = +23 dBm,
802.11AC 80 MHz / 256 QAM
dBm
—
31
—
dB
—
-42
—
R_X Gain
RFC to R_X, Gain Mode
dB
10
12
—
R_X Insertion Loss
RFC to R_X, Bypass Mode
dB
—
6
7.5
R_X Input / Output Return Loss
RFC to R_X, Gain Mode
dB
—
10
—
R_X Noise Figure
Gain Mode
dB
—
2.2
—
R_X Input IP3
Gain Mode
dBm
—
10
—
R_X Input P0.1dB
Bypass Mode
dBm
—
10
—
R_X Input P1dB
Gain Mode
dBm
-5
-3
—
R_X EVM
P_IN = -15 dBm, Gain Mode
dB
—
-46
—
Quiescent Current
Control Current
No RF, Gain Mode, V_DD = 3 V
All States except High Gain
High Gain State
mA
—
10
12
µA
—
10
330
—
Absolute Maximum Ratings^5,6
Truth Table^7,8
Parameter
Input Power
R_X Gain Mode
R_X Bypass Mode
T_X, 5.0 V_C, RFC - T_X
T_X, 3.3 V_C, RFC - T_X
V_DD
Operating Temperature
Storage Temperature
Absolute Maximum
0 dBm
20 dBm
35 dBm CW
33 dBm CW
5V
-40°C to +85°C
-65°C to +150°C
Control V1 Control V2
Low
Low
RFC–R_X
Bypass
Mode
Hi
Low
Gain Mode
RFC–T_X
Off
Off
Low
Hi
Off
On
7. Differential voltage, V (state Low) - V (state Hi), must be
+2.7 V minimum and must not exceed +5.0 V.
8. Low = 0 ± 0.3 V, Hi = +2.7 V to +5.0 V.
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support