MAFC-010511 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – Frequency Doubler

MAFC-010511
Frequency Doubler
16 - 24 GHz Output
Electrical Specifications: V_D = +5V, V_G = -0.7 V, P_IN = 0 dBm, T_A = +25°C
Parameter
Frequency (Input)
Frequency (Output)
Output Power (P_OUT)
1xF_IN Leakage
3xF_IN Leakage
4xF_IN Leakage
Input Return Loss
Output Return Loss
Supply Current (I_D)
Units
GHz
GHz
dBm
dBm
dBm
dBm
dB
dB
mA
Min.
8
16
+15
—
—
—
—
—
—
Typ.
—
—
+17
-25
-15
-5
12
12
130
Rev. V1
Max.
12
24
—
—
—
—
—
—
—
Absolute Maximum Ratings ^3,4,5
Parameter
Input Power
Drain Voltage
Gate Voltage
Storage Temperature
Case Temperature
Junction Temperature⁶
Absolute Maximum
+8 dBm
+7 V
-1.5 V to 0 V
-55°C to +150°C
-40°C to +85°C
+160 ºC
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
5. Operating at nominal conditions with T_J ≤ 160°C will ensure
MTTF > 1 x 10⁶ hours.
6. Junction Temperature (T_J) = T_C + Ó¨jc * ((V * I) - (P_OUT - P_IN))
Typical thermal resistance (Өjc) = 93°C/W.
a) For T_C = 25°C,
T_J = 81°C @ 5 V, 130 mA, P_IN = +5 dBm, P_OUT = 17 dBm
b) For T_C = 85°C,
T_J =141°C @ 5 V, 130 mA, P_IN = +5 dBm, P_OUT = 17 dBm
Handling Procedures
The following precautions should be observed to
avoid damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be dam-
aged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1A devices.
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]