MADC-010736_15 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Lead-Free 6 mm Laminate Package

MADC-010736
Receiver, High IIP3, SMD
40.5 - 43.5 GHz
Rev. V2
Electrical Specifications⁶:
T_B = 25°C, V_D1,2,3 = 4.0 V, I_D1 = 10 mA, I_D2 = 100 mA, V_G3 = -0.4 V, V_G4 = -3 V, IF = 3.5 GHz
Parameter
Units
Min.
Typ.
Max.
Frequency Range (RF)
GHz
40.5
—
43.5
Frequency Range (LO)
GHz
18.5
—
21.75
Frequency Range (IF)
GHz
DC
—
3.5
Conversion Gain
dB
10
12
—
Image Rejection
dBc
—
30
—
Input IP3
dBm
—
6
—
Noise Figure
dB
—
3.5
5.0
LO Power
dBm
—
0
—
IF Return Loss
dB
—
15
—
RF Return Loss
dB
—
18
—
LO Return Loss
dB
—
15
—
DC Current (ID1+ID2+ID3)
mA
—
290
—
6. Apply gate voltages prior to drain voltages. Adjust VG1, VG2 and VG3 between –1.0 and –0.1 V to achieve specified drain current.
Typical current, 290 mA = 10 ( ID1) + 100 (ID2) + 180 (ID3). Refer to App Note [1] for biasing details.
Maximum Operating Ratings^7,8
Parameter
Absolute Maximum
Input Power
+5 dBm
Drain Supply Voltage
+4.3 Volts
Operating Temperature
-40°C to +85°C
Junction Temperature
+150°C
Storage Temperature
-55°C to +150°C
7. Exceeding any one or combination of these limits may cause
permanent damage to this device.
8. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support