MAAM-009452_15 Datasheet, PDF (2/7 Pages) M/A-COM Technology Solutions, Inc. – Broadband CATV Single Ended 4-Way Active Splitter

MAAM-009452
Broadband CATV Single Ended 4-Way Active Splitter
50 - 1100 MHz
Rev. V1
Electrical Specifications: Freq. = 1000 MHz, T_A = 25°C, V_DD = +3.3 Volts, Z₀ = 75 Ω
Parameter
Test Conditions
Units Min. Typ. Max.
Gain
IN to OUT1, OUT2, OUT3 & OUT4
dB
2.3
2.5
4.8
Gain Flatness
IN to OUT1, OUT2, OUT3 & OUT4
dB
-
0.5
-
Noise Figure
IN to OUT1, OUT2, OUT3 & OUT4
dB
-
4.5
-
Input Return Loss
IN
dB
-
15
-
Output Return Loss
OUT1, OUT2, OUT3, OUT4
dB
-
9
-
Composite Triple Beat, CTB
132 channels, +15 dBmV/channel at the input dBc
-
-65
-
Composite Second Order, CSO 132 channels, +15 dBmV/channel at the input dBc
-
-56
-
Reverse Isolation
OUT1, OUT2, OUT3 & OUT4 to IN
dB
-
28
-
Output to Output Isolation
Isolation between all RF outputs
dB
-
21
-
P1dB
IN to OUT1, OUT2, OUT3, OUT4
dB
-
5
-
OIP3
500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm
-
25
-
OIP2
500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm
-
40
-
I_DD
V_DD= +3.3 Volts
mA
-
96
120
Absolute Maximum Ratings ^4,5,6
Parameter
Absolute Maximum
RF Input Power
Voltage
Operating Temperature
Junction Temperature⁷
12 dBm
10.0 volts
-20°C to +85°C
+150°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
6. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
7. Junction Temperature (T_J) = T_C + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 101° C/W.
a) For T_C = 25°C,
T_J = 65°C @ 3.3 V, 120 mA
b) For T_C = 85°C,
T_J = 123 °C @ 3.3 V, 115 mA
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
An external protection circuit using an inexpensive
anti-parallel diode pair can be used to protect the
IC.
Please reference application note AN3028 on
http://www.macomtech.com for further detail.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support