MAAM-009320_15 Datasheet, PDF (2/12 Pages) M/A-COM Technology Solutions, Inc. – Variable Gain Amplifier with Analog Control

MAAM-009320
Variable Gain Amplifier with Analog Control
400 - 2700 MHz
Rev. V1
Electrical Specifications^5,6,7: Freq. = 2140 MHz, T_A = +25°C, Z₀ = 50 Ω
Parameter
Units
Min.
Gain
dB
24
Noise Figure
dB
—
Input Return Loss
dB
—
Output Return Loss
dB
—
Output P1dB
dBm
—
Output IP3
Pout = +9 dBm per tone SCL, 1 MHz spacing
dBm
40
Attenuation Range
dB
25
Attenuation Control
V
—
Small Signal Current
mA
—
Typ.
25.5
3.0
13
12
28
42
26.5
0 to 3
231
Max.
—
—
—
—
—
—
—
—
300
5. Contact M/A-COM Technology Solutions’ Application Engineering Department for performance and tuning at other frequencies within
frequency range.
6. Typical performance at no attenuation, Vcntrl = 0V.
7. Typical small signal currents are 76 mA for stage 1 and 155 mA for stage 3.
Absolute Maximum Ratings^8,9
Parameter
Absolute Maximum
Input Power
+6 dBm
Voltage (all DC pins)
6 volts
Storage Temperature
-55°C to +150°C
Case Temperature
Junction Temp, Stage 1 ^10,11
Junction Temp, Stage 3 ^10,12
-40°C to +85°C
150°C
160°C
8. Exceeding any one or combination of these limits may cause
permanent damage to this device.
9. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
10.Junction Temperature (T_J) = T_A + Ó¨jc * ((V * I) - (P_OUT - P_IN))
11.Stage 1 typical thermal resistance (Өjc) = 106.5° C/W
12.Stage 3 typical thermal resistance (Өjc) = 68.6° C/W
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
class 1A devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support