MAAM-008970 Datasheet, PDF (2/5 Pages) M/A-COM Technology Solutions, Inc. – Satellite Communications Single Ended 2-Way Active Splitter 950 - 2150 MHz

MAAM-008970
Satellite Communications Single Ended 2-Way Active Splitter
950 - 2150 MHz
Electrical Specifications: Freq: 2150 MHz, T_A = 25°C, V_DD = +5 Volts, Z₀ = 75 Ω
Parameter
Test Conditions
Units Min. Typ.
Gain
In to Out1, In to Out2
dB
4.0
4.8
Gain Flatness
In to Out1, In to Out2
dB
—
0.3
Noise Figure
In to Out1, In to Out2
dB
—
5.0
Input Return Loss
Input
dB
—
12
Output Return Loss
Output
dB
—
12
Reverse Isolation
Out1 to In, Out2 to In
dB
—
18
Output to Output Isolation
Out1 to Out2
dB
—
23
Output Power at 1 dB Compression, P1dB
1450 MHz
dBm —
7
Output 3rd Order Intercept Point, OIP3 1450 MHz, P_IN = 0 dBm, 6 MHz Spacing dBm —
17
Output 2nd Order Intercept Point, OIP2 1450 MHz, P_IN = 0 dBm, 6 MHz Spacing dBm —
30
I_DD
V_DD = + 5 Volts
mA
—
60
Rev. V1
Max.
5.8
—
—
—
—
—
—
—
—
—
75
Absolute Maximum Ratings ^4,5,6
Parameter
Absolute Maximum
Input Power
+12 dBm
Vbias
+10.0 V
Operating Temperature
Junction Temperature ⁷
0°C to +85°C
+150°C
Storage Temperature
-65°C to +125°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
6. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
7. Junction Temperature (T_J) = T_A + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 148 °C/W.
a) For T_A = 25°C,
T_J = 69 °C @ 5.0 V, 60 mA
b) For T_A = 85°C,
T_J = 126 °C @ 5.0 V, 55 mA
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.