MAAM-008822_15 Datasheet, PDF (2/8 Pages) M/A-COM Technology Solutions, Inc. – Broadband CATV Single Ended 3-Way Active Splitter

MAAM-008822
Broadband CATV Single Ended 3-Way Active Splitter
50 - 1100 MHz
Electrical Specifications: Freq. = 1000 MHz, T_A = 25°C, V_DD = +5 Volts, Z₀ = 75 Ω
Parameter
Test Conditions
Units Min.
Typ.
Gain
IN to OUT1
IN to OUT2, IN to OUT3
dB
1
3
1.3
4.5
Gain Flatness
IN to OUT1, IN to OUT2, IN to OUT3
dB
-
0.5
Noise Figure
IN to OUT1
IN to OUT2; IN to OUT3
dB
-
-
4.5
4.0
Input Return Loss
IN
dB
-
16
Output Return Loss
OUT1
OUT2, OUT3
dB
-
-
8
19
Composite Triple Beat, CTB
132 channels, +15 dBmV/channel at the input
All Outputs
dBc
-
-63
Composite Second Order, CSO
132 channels, +15 dBmV/channel at the input
All Outputs
dBc
-
-60
Reverse Isolation
OUT1 to IN
OUT2 to IN, OUT3 to IN
dB
-
-
-30
-27
Output to Output Isolation
OUT1 to OUT2; OUT1 to OUT3
OUT2 to OUT3
dB
-
-
21
18
Output Power at 1dB Compression,
P1dB
OUT1
OUT2, OUT3
dBm
-
-
7.5
11
Output 3rd Order Intercept Point,
OIP3
500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout
OUT1
OUT2, OUT3
dBm
-
-
23
24
Output 2nd Order Intercept Point,
OIP2
500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout
OUT1
OUT2, OUT3
dBm
-
-
45
48
IDD
VDD= +5 Volts
mA
-
120
Rev. V1
Max.
3
5.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
150
Absolute Maximum Ratings ^4,5,6,7
Parameter
Absolute Maximum
Max Input Power
+12 dBm
Vbias
+10.0 V
Operating Temperature
-20°C to +85°C
Junction Temperature
150°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near these
survivability limits.
6. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
7. Junction Temperature (T_J) = T_C + Ó¨jc * ((V * I) - (P_OUT - P_IN))
Typical thermal resistance (Өjc) = 77° C/W.
a) For T_C = 25°C,
T_J = 71 °C @ 5 V, 120 mA
b) For T_C = 85°C,
T_J = 127 °C @ 5 V, 110 mA
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support