English
Language : 

MAAM-008821-V1-APR10 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Broadband CATV Single Ended 5-Way Active Splitter
MAAM-008821
Broadband CATV Single Ended 5-Way Active Splitter
50 - 1100 MHz
Rev. V1
Electrical Specifications: Freq. 50 - 1000 MHz, TA = 25°C, VDD = +5 Volts, Z0 = 75 Ω
Parameter
Test Conditions
Units Min.
Gain
IN to All Outputs
dB
2
Gain Flatness
IN to All Outputs
dB
-
Noise Figure
IN to All Outputs
dB
-
Input Return Loss
IN
dB
-
Output Return Loss
All Outputs
dB
-
Composite Triple Beat, CTB
132 channels, +15 dBmV/channel at the input dBc
-
Composite Second Order, CSO
132 channels, +15 dBmV/channel at the input dBc
-
Reverse Isolation
All Outputs to IN
dB
-
Output to Output Isolation
Isolation between all RF outputs
dB
-
Output Power at 1dB Compression, P1dB
IN to All Outputs
dB
-
Output 3rd Order Intercept Point, OIP3 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm -
Output 2nd Order Intercept Point, OIP2 500 MHz, 2-tone, 6 MHz spacing, -15 dBm Pout dBm -
IDD
VDD= +5 Volts
mA
-
Typ.
3.5
1.0
3.8
15
12
-70
-60
30
20
9
24
48
120
Max.
4
1.2
-
-
-
-
-
-
-
-
-
-
150
Absolute Maximum Ratings 4,5,6
Parameter
Absolute Maximum
Max Input Power
+12 dBm
Vbias
+10.0 V
Operating Temperature
Junction Temperature7
-20°C to +85°C
150°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology does not recommend sustained
operation near these survivability limits.
6. These operating conditions will ensure MTTF > 1 x 106 hours.
7. Junction Temperature (TJ) = TC + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 77° C/W.
a) For TC = 25°C,
TJ = 71 °C @ 5 V, 120 mA
b) For TC = 85°C,
TJ = 127 °C @ 5 V, 110 mA
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices. An external protection circuit using an
inexpensive anti-parallel diode pair can be used to
protect the IC.
Please reference application note AN3028 on
http://www.macomtech.com for further detail.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.