MAAM-008820 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Broadband CATV Single Ended 4-Way Active Splitter 50 - 1100 MHz

MAAM-008820
Broadband CATV Single Ended 4-Way Active Splitter
50 - 1100 MHz
Rev. V2
Electrical Specifications: Freq. = 50 - 1000 MHz, T_A = 25°C, V_DD = +5 Volts, Z₀ = 75 Ω
Parameter
Test Conditions
Units Min. Typ. Max.
Gain
IN to OUT1, OUT2, OUT3 & OUT4
dB 1.8 3.0 3.8
Gain Flatness
IN to OUT1, OUT2, OUT3 & OUT4
dB
-
0.5 1.0
Noise Figure
IN to OUT1, OUT2, OUT3 & OUT4
dB
-
3.8
-
Input Return Loss
IN
dB
-
15
-
Output Return Loss
OUT1, OUT2, OUT3, OUT4
dB
-
11
-
Composite Triple Beat, CTB
132 channels, +15 dBmV/channel at the input
dBc
-
-70
-
Composite Second Order, CSO
132 channels, +15 dBmV/channel at the input
dBc
-
-62
-
Reverse Isolation
OUT1, OUT2, OUT3 & OUT4 to IN
dB
-
29
-
Output to Output Isolation
Isolation between all RF outputs
dB
-
21
-
P1dB
IN to OUT1, OUT2, OUT3, OUT4
dB
-
10
-
OIP3
500MHz, 2-tone, 6MHz spacing, -15 dBm Pout dBm
-
25
-
OIP2
500MHz, 2-tone, 6MHz spacing, -15 dBm Pout dBm
-
48
-
I_DD
V_DD= +5 Volts
mA
-
120 150
Absolute Maximum Ratings ^4,5,6
Parameter
Absolute Maximum
Max Input Power
+12 dBm
Vbias
+10.0 V
Operating Temperature
Junction Temperature⁷
-20°C to +85°C
150°C
Storage Temperature
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
6. These operating conditions will ensure MTTF > 1 x 10⁶ hours.
7. Junction Temperature (T_J) = T_C + Ó¨jc * ((V * I) - (P_OUT - P_IN))
Typical thermal resistance (Өjc) = 77° C/W.
a) For T_C = 25°C,
T_J = 71 °C @ 5 V, 120 mA
b) For T_C = 85°C,
T_J = 127 °C @ 5 V, 110 mA
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.