MAAD-009195-000100 Datasheet, PDF (2/8 Pages) M/A-COM Technology Solutions, Inc. – Constant Phase Digital Attenuator 15.5 dB, 5-Bit, TTL Driver, DC-3.0 GHz

MAAD-009195-000100
Constant Phase Digital Attenuator
15.5 dB, 5-Bit, TTL Driver, DC-3.0 GHz
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω, V_CC = +5.0V, V_EE = -5.0V
Rev. V1
Parameter
Operating Power ²
Reference Insertion Loss
Test Conditions
—
—
Attenuation Accuracy ³
Phase Accuracy
Relative to Reference Loss State
VSWR
Any Single Bit
Any Combination of Bits
Any Single Bit
Any Single Bit
Any Combination of Bits
Any Combination of Bits
Any Combination of Bits
—
Switching Speed
Ton
Toff
Trise
Tfall
1 dB Compression ⁴
Input IP3
Input IP2
Vcc
Vee
V_IL
V_IH
lin (Input Leakage Current)
Icc
(Quiescent Supply Current)
1.3 V Cntl to 90% RF
1.3 V Cntl to 10% RF
10% RF to 90% RF
90% RF to 10% RF
Reference State
Reference State
For two-tone Input Power
up to +5 dBm
For two-tone Input Power
up to +5 dBm
—
—
LOW-level input voltage
HIGH-level input voltage
Vin = V_CC or GND
Vcntrl = V_CC or GND
ΔIcc
(Additional Supply Current Per
TTL Input Pin)
Iee
Thermal Resistance θjc
V_CC = Max
Vcntrl = V_CC - 2.1 V
VEE min to max
Vin = V_IL or V_IH
—
Frequency
—
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 3.0 GHz
DC - 3.0 GHz
DC - 2.0 GHz
2.0 - 3.0 GHz
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
DC - 3.0 GHz
—
—
__
__
0.05 GHz
0.5 - 3.0 GHz
0.05 GHz
0.5 - 3.0 GHz
0.05 GHz
0.5 - 3.0 GHz
—
—
—
—
—
—
—
—
—
Units
Min
Typ
Max
dBm
—
—
+20
dB
—
—
4.0
dB
—
—
5.0
dB
—
—
5.3
± (0.2 + 2% of attenuation setting in dB) dB
± (0.2 + 2% of attenuation setting in dB) dB
deg
±3
deg
±4
deg
±3
deg
±4
deg
±7
Ratio
—
—
1.8:1
ns
ns
ns
ns
dBm
dBm
dBm
dBm
dBm
dBm
V
V
V
V
uA
uA
—
47
—
—
24
—
—
23
—
—
13
—
—
>+26
—
—
>+26
—
—
+43
—
—
+40
—
—
+50
—
—
+72
—
4.5
5.0
5.5
-8.0
-5.0
-4.5
0.0
0.0
0.8
2.0
5.0
5.0
-1
—
1
—
250
400
mA
—
—
1.5
mA
-1.0
-0.2
—
°C/W
—
50
—
2. Maximum input power is specified with power applied to RF1. If power is applied to RF2, then maximum
operating power is +16 dBm.
3. This attenuator is guaranteed monotonic.
4. 1 dB Compression was measured up to +26 dBm, which is the absolute maximum rating for this device.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.