MA4P7455-1225 Datasheet, PDF (2/7 Pages) M/A-COM Technology Solutions, Inc. – Quad PIN Diode π Attenuator 10 - 4000 MHz

MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Typical 50 Ω Performance⁴ @ 25°C using Wideband RF Circuit Design
Parameter
Insertion Loss
Insertion Loss
Return Loss
Attenuation
Test Conditions
+3 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
0 mA - Series Diode Bias / 0.75 V - Shunt 1 and 2 Bias
1000 MHz
Units
dB
Min.
—
dB
—
dB
—
dB
—
Input IP3
0 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
F1 = 1000 MHz, F2 = 1100 MHz
dBm
—
dBm
—
Rev. V2
Typ.
-2.0
Max.
—
-1.0
—
-10
—
-29
—
43
—
43
—
Input IP3
0 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
F1 = 100 MHz, F2 = 110 MHz
Settling Time
Within 1 dB of Final Attenuation Value
1000 MHz
RF C.W. Incident
Power
0 - 20 V Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
4. Values shown include through loss calibrated out of RF test circuit.
dBm
—
43
—
dBm
—
33
—
uS
—
3
—
dBm
—
+20
—
Typical 75 Ω Performance⁵ @ +25°C using Wideband RF Circuit Design
Parameter
Test Conditions
Units Min.
Insertion Loss
+2 mA Series Diode Bias / 1.0 V Shunt 1 and 2 Bias
+4.5 mA Series Diode Bias / 1.0 V Shunt 1 and 2 Bias
1000 MHz
dB
dB
—
—
Attenuation
0 mA / Series Diode and 1.0 V Shunt 1 and 2 Bias
1000 MHz
dB
—
Return Loss
+4.5 mA / Series Diode and 1.0 V Shunt 1 and 2 Bias
1000 MHz
dB
—
5. Values shown include through loss calibrated out of RF test circuit.
Typ.
-1.1
-0.6
-27
-10
Max.
—
—
—
—
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.