MA4P7446F-1091T_2 Datasheet, PDF (2/6 Pages) M/A-COM Technology Solutions, Inc. – Non Magnetic SMQ MELF PIN Diode

MA4P7446F-1091T
Non Magnetic SMQ MELF PIN Diode
Electrical Specifications @ T_AMBIENT = +25°C
Parameter
Symbol
Condition
Forward Voltage
V_F
I_F = +100mA
Reverse Voltage
Total Capacitance
Series Resistance
V_R
I_R = -1µA
C_T
-100V @ 1MHz
R_S
+100mA @ 100MHz
Parallel Resistance
Carrier Lifetime
I-Region Length
C.W. Thermal Resistance
Power Dissipation in Free Air
R_P
-10V @ 100MHz
t_L
I_F = +6mA , I_R = -10mA
(50% - 90% Voltage)
µM
——
θ
I_HIGH = 1A, I_LOW = 10mA,
T = 1mS
W
I_F = +100mA
Power Dissipation
P_DISS
I_F = +100mA
V3
Unit Value
1.0 V_DC (Max.)
600V_DC (Min.)
2.2pF (Max.)
0.5Ω (Max)
10KΩ (Min.)
19µs (Typ.)
175µM (Typ.)
6°C/W (Max.)
8W (Max.)
25W (Max.)
Environmental Capability
MELF devices are appropriate for use in industrial and military applications and can be screened to meet the
environmental requirements of MIL-STD-750, MIL-STD-202 as well as other military standards. The table below
lists some of the MIL-STD 750 tests the device is designed to meet.
Test
High Temperature Storage
Temperature Shock
HTRB
Moisture Resistance
Gross Leak
Vibration Fatigue
Solderability
MIL-STD-750
Method
1031
1051
1038
1021
1071 Cond. E
2046
2026
Description
+150°C, for 340 Hours
-65°C to +150°C, 20 Cycles
80% of rated V_B, +150°C, for 96 Hours
No Initial Conditioning, 85% RH, +85°C
Dye Penetrant Visual
20,000G’s, 60Hz, x, y, z axis
Test Temperature = +245°C
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.