MA4EX600L1-1225 Datasheet, PDF (2/5 Pages) M/A-COM Technology Solutions, Inc. – Silicon Double Balanced HMIC Mixer

MA4EX600L1-1225
Silicon Double Balanced HMIC^TM Mixer
4.2 - 6.0 GHz
Rev. V2
Electrical Specifications: T_A = +25°C, LO = +5 dBm, RF = -10 dBm, IF = 60 MHz
Parameter
Test Conditions
Units
Min.
Typ.
Conversion Loss
L - R Isolation
L - I Isolation
R - I Isolation
LO VSWR
RF VSWR
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
dB
—
6.4
6.8
dB
—
26.0
25.0
dB
—
24.0
23.0
dB
—
13.0
15.0
dB
—
1.18:1
1.67:1
dB
—
1.87:1
1.89:1
IF VSWR
DC - 400 MHz
dB
—
1.55:1
Input IP3
Input P1dB
5.0 GHz
4.2 - 6.0 GHz
5.0 GHz
4.2 - 6.0 GHz
dBm
—
5.7
7.6
dBm
—
0.3
0.8
IF 1 dB Bandwidth
LO = 5.0 GHz @ +10 dBm
MHz
0
—
Max.
8.0
9.5
—
—
—
—
—
—
—
—
2000
Absolute Maximum Ratings^1,2
Parameter
Incident Power
LO
RF
Operating Temperature
Absolute Maximum
20 dBm
20 dBm
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support