MA43000 Datasheet, PDF (2/5 Pages) Tyco Electronics – Step Recovery Diodes

MA43000, MA44600 Series
Silicon Step Recovery Diodes
Electrical Specifications @ T_A = +25 °C
Snap Varactors
Minimum Reverse
Voltage² (V_R)
Part Number ¹
Junction
Capacitance(C_j)³
Min./Max.
Vr=6V
(V)
MA44621A
20
MA44631A
30
MA44631C
30
MA44641A
40
(pF)
0.200-0.300
0.300-0.500
0.700-0.900
0.400-0.600
Rev. V5
Minimum
Lifetime (T_L)
If=10mA/
Ir=6mA
(nS)
7
8
8
12
Transition Time (T_s)⁴
(pS)
Nominal
50
70
70
90
(pS)
Max.
100
100
100
150
High Power Circuit Tested Step Recovery Diodes
Part Number ¹
Minimum
Reverse
Voltage²
(V_R)
Min./Max.
(V)
Junction
Capacitance
(C_j)³
Min./Max.
Vr=6V
(pF)
Lifetime
(T_L)
Min./Max.
If=10mA/
Ir=6mA
(nS)
MA43000
85-105
3.00-4.50
250-500
MA43002
45-70
1.60-2.40
75-225
MA43004
30-45
0.45-0.85
20-50
Part Number ¹
Case Style¹
MA43000
103
MA43002
91
MA43004
91
Minimum
Output Power
(Watts)
4.0
1.5
0.3
Input
Frequency
(GHz)
0.333
2.000
3.300
Maximum
Snap Time
(T_s)⁴
(pS)
100
100
100
Output
Frequency
(GHz)
2.000
6.000
13.000
Maximum
Thermal
Resistance
(θjc)
(°C/W)
12
25
45
Maximum
Input Power
(Watts)
15
5
2
1. When ordering, specify the desired case style by adding the case designation as a suffix to the model number. Case styles for the
MA44600 series are -30,-91 and –93. To order chip form, add the suffix “-134” to the model number. The nominal chip size for the
MA44600 series is 15 mils.
2. Reverse voltage (V_R) is measured at a reverse bias current of 10µA.
3. Junction capacitance is measured at a reverse voltage of 6V and a frequency of 1MHz.
4. Transition time is measured between 20% and 80% points on the voltage recovery trace. Test conditions are +10mA and –10 volts.
Specifications Subject to Change Without Notice.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.