LDPF0004-FC Datasheet, PDF (2/2 Pages) M/A-COM Technology Solutions, Inc. – PINFET optical receiver modules

Common Characteristics @ 25°C
Dark Current @ -5V
Maximum Optical Input @ -5V
Sensitivity Derating Over
Temperature
Detector Responsivity
850nm
1300nm
1550nm
Maximum Output Signal Level
Output Impedance
Load Impedance
Supply Voltage
Power Supply Current +5V
Power Supply Current -5V
Fiber - MM Tight Buffer
nA
dBm
dB
A/W
Vpp
Ohms
Ohms
V
mA
mA
um
LDSF & LDPF Series
min
typ
max
0.5
1
Sensitivity Level
(dBm) +25dB
<1
.5
0.9
0.95
2.5
10
1000
4.5
5.5
25
35
10
15
50/125/245/900
LDPW Series
min
typ
max
0.5
1
-3
0
<1
0.9
0.95
0.8
10
1000
4.5
5.5
25
35
10
15
50/125/245/900
LDFR Series
min
typ
max
0.5
1
Sensitivity Level
(dBm) +25dB
<1
0.6
0.65
0.9
0.95
3.0
10
1000
4.75
5.25
20
-
50/125/245/900
Absolute Maximum Ratings
Operating Temperature
Storage Temperature
Positive Supply Voltage
Negative Supply Voltage
Detector Bias
Soldering time at 260°C
Units
°C
°C
V
V
V
secs
LDPF, LDPW &
LDSF Series
-40 to +70
-40 to +85
+7
-7
-10
10
LDFR Series
-55 to +85
-55 to +85
+7
-
-10
10
Notes:
1. Bandwidth is measured at the –3dB point.
2. A given bandwidth will typically support an NRZ data rate of 1.4
times the 3dB bandwidth.
3. Sensitivity is calculated using the noise voltage measured at
25^oC at the output of a 3-pole Butterworth filter whose bandwidth
equals that of the PINFET’s minimum specified bandwidth.
Sensitivity is specified as the average optical power in dBm
measured at 1300nm and T_a = 25^oC for a BER \of 10^-9.
OOuuttlliinnee DDrraawwiinngg
Part Numbering Diagram
Bandwidth
0004 = 4MHz
0005 = 5MHz
0012 = 12MHz
0024 = 24MHz
0032 = 32MHz
0065 = 65MHz
0120 = 120 MHz
0250 = 250MHz
RoHS Compliant
Designator
__ __ __ __ __ __ __ __ __ __ R
Detailed package drawings are available upon request.
Series Indicator
LDPF
LDPW
Pin Assignments
Pin
Function
LDSF
LDFR
1 -5 V detector bias
2,6,9,11 no connection
12,13,14 no connection
3,5,8 ground
4 -5 volts (LDFR = NC)
7 output
10 +5 volts
Connector Type
FC = FC / PC
LC = LC / PC
SC = SC / PC
ST = ST®
No Characters = No Connector
Products can be ordered directly from Laser Diode Inc. or its representatives. When ordering, refer to the numbering diagram above.
For a complete listing of representatives, visit our website at www.laserdiode.com
Personal Hazard and Handling Precautions:
Handle optical fiber with normal care, avoiding
stretch, tension, twist, kink or bend abuse.
ESD precautions apply.
Warranty:
Please refer to your product purchase
agreement for complete details or check
with your Laser Diode sales representative.
Notice:
Laser Diode Inc. reserves the right
to make changes to the products or
information contained herein without
notice. No liability is assumed as a
result of their use or application.
LDI Document #10-4400-0008 Rev. D 12/17/08