DS56-0006 Datasheet, PDF (2/4 Pages) Tyco Electronics – Low Cost Six-Way SMT Power Divider 1700 - 2000 MHz

DS56-0006
Low Cost Six-Way SMT Power Divider
1700 – 2000 MHz
Rev. V3
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Insertion Loss above 7.8 dB
1700 – 2000 MHz
1850 – 1910 MHz
Isolation
1700 – 2000 MHz
1850 – 1910 MHz
VSWR Input
1700 – 2000 MHz
1850 – 1910 MHz
Output
1700 – 2000 MHz
1850 – 1910 MHz
Amplitude Balance
1700 – 2000 MHz
1850 – 1910 MHz
Phase Balance
1700 – 2000 MHz
1850 – 1910 MHz
Units
dB
dB
dB
dB
—
—
—
—
dB
dB
Deg.
Deg.
Min
—
—
18
21
—
—
—
—
—
—
—
—
Typ
1.3
1.0
25
26
1.7:1
1.3:1
1.3:1
1.1:1
0.8
1.0
10
8
Max
1.8
1.5
—
—
2.0:1
1.7:1
1.7:1
1.3:1
1.3
1.3
20
16
Absolute Maximum Ratings ^2,3
Parameter
Input Power⁴
Operating Temperature
Storage Temperature
Absolute Maximum
1 W CW
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. With internal load dissipation of 0.125 W maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.