DS54-0006 Datasheet, PDF (2/4 Pages) Tyco Electronics – Four Way SMT Power Splitter/Combiner 1700 - 2000 MHz

DS54-0006
Four Way SMT Power Splitter/Combiner
1700 – 2000 MHz
Rev. V4
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Insertion Loss above 6.0 dB
Isolation
1700 - 2000
VSWR
Output
Input
Input
1700 – 1880
1880 – 2000
Amplitude Balance
Phase Balance
Units
dB
dB
—
—
—
dB
Deg
Min
—
18
—
—
—
—
—
Typ
1.4
23
1.2:1
1.6:1
1.4:1
0.8
5
Max
1.7
—
1.7:1
2.0:1
1.7:1
1.3
10
Absolute Maximum Ratings ^2,3
Parameter
Input Power ⁴
Operating Temperature
Storage Temperature
Absolute Maximum
1 W CW
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. With internal load dissipation of 0.125 W Maximum.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
Typical Performance Curves @25ºC
Insertion Loss vs. Frequency
Amplitude Balance vs. Frequency
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.