DS52-0007 Datasheet, PDF (2/4 Pages) Tyco Electronics – Low Cost Two-Way GMIC SMT Power Divider 2200 - 2500 MHz

DS52-0007
Low Cost Two-Way GMIC SMT Power Divider,
2200 - 2500 MHz
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Insertion Loss
(above 3.0 dB theoretical loss)
Isolation
Input VSWR
Output VSWR
Amplitude Balance
Phase Balance
Frequency
2200 - 2500 MHz
2200 - 2500 MHz
2200 - 2500 MHz
2200 - 2500 MHz
2200 - 2500 MHz
2200 - 2500 MHz
Rev. V5
Units
dB
dB
Ratio
Ratio
dB
°
Min
—
15
—
—
—
—
Typ
1.0
22
1.6:1
1.3:1
0.1
2
Max
1.1
—
1.8:1
1.5:1
—
—
Absolute Maximum Ratings ^1,2
Parameter
Input Power ³
Absolute Maximum
1 W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
3. With internal load dissipation of 0.125 W maximum.
Recommended PCB Configuration
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
Dimensions in inches.
Circuit Material: FR-4, .016 Thick.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.