AT10-0009_15 Datasheet, PDF (2/4 Pages) M/A-COM Technology Solutions, Inc. – Voltage Variable Absorptive Attenuator

AT10-0009
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Insertion Loss
Attenuation
(Above Loss)
Attenuation
Flatness
VSWR
Switching Speed
Linear Operation
Input IP₃
I _Control
Test Conditions
0 volts
12 mA bias current
0 to 30 dB attenuation
0 to 30 dB attenuation
50% Control to 90%/10%
RF
—
Two-tone inputs up to +10
dBm
—
Frequency
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
800-1000 MHz
800-1000 MHz
800-1000 MHz
Rev. V9
Units
dB
dB
dB
dB
dB
dB
Ratio
Ratio
µs
dBm
dBm
mA
Min
—
—
30
33
—
—
—
—
—
—
+35
—
Typ
3.5
3.3
-
38
1.5
0.4
1.6:1
1.4:1
—
+20
+40
—
Max
4.2
3.9
—
—
2.5
0.8
2.0:1
1.7:1
10.0
—
—-
30
Absolute Maximum Ratings ^2,3
Parameter
Max. Input Power
Operating Temperature
Storage Temperature
Absolute Maximum
+27 dBm
-40°C to +85°C
-65°C to +125°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Recommended PCB Configuration
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.