English
Language : 

AT-267 Datasheet, PDF (2/3 Pages) Tyco Electronics – Digital Attenuator, 1 Bit, 15 dB Step DC - 2.0 GHz
AT-267
Digital Attenuator, 1-Bit, 15 dB
DC - 2.0 GHz
Electrical Specifications3: TA = 25°C, VC = +2.5 Volts, Z0 = 50 Ω
Parameter
Insertion Loss
(Reference State)
Attenuation
VSWR
Input IP3
P1dB
Control Current
Test Conditions
1.0 GHz
2.0 GHz
1.0 GHz
2.0 GHz
1.0 GHz
2.0 GHz
1.0 GHz
Insertion Loss State
Attenuation State
1.0 GHz
Insertion Loss State
Attenuation State
—
Units
dB
dB
dB
Ratio
Ratio
dBm
dBm
Min
—
—
14.6
14.4
—
—
40
40
dBm
24
dBm
20
µA
—
Trise, Tfall
Ton, Toff
Transients
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF,
50% Control to 10% RF
In-band
nS
—
nS
—
mV
—
3. For positive voltage control, external DC blocking capacitors are required on all RF ports (pins 1, 2 and 3).
Rev. V4
Typ
0.3
0.4
15.1
14.9
1.2:1
1.3:1
50
50
26
23
—
29
50
10
Max
0.4
0.5
15.6
15.4
—
—
—
—
—
—
10
—
—
—
SOT-25
Positive Control Voltage Schematic
5
4
1
2
3
39 pF
39 pF
39 pF
Truth Table 4,5
Mode
(Control)
V1
V2
Attenuation
Positive 4
0 ± 0.2V
+2.5V to +5V
15 dB
+2.5V to +5V
0 ± 0.2V Reference State
Negative 5
0 ± 0.2V
-2.5V to -5V
-2.5V to -5V Reference State
0 ± 0.2V
15 dB
4. External DC blocking capacitors are required as noted.
5. If negative control is used, DC blocking capacitors are not
required on RF ports and ground.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.