AT-109 Datasheet, PDF (2/3 Pages) Tyco Electronics – Voltage Variable Absorptive Attenuator, 35 dB 0.5 - 2 GHz

AT-109
Voltage Variable Absorptive Attenuator
35 dB, 0.5 - 2.0 GHz
Electrical Specifications ⁷: T_A = 25°C, Z₀ = 50 Ω
Parameter
Test Conditions
Units
Insertion Loss
0.5 - 1.0 GHz
dB
1.0 - 2.0 GHz
dB
Attenuation
0.5 - 1.0 GHz
dB
1.0 - 2.0 GHz
dB
Flatness
(Peak to Peak)
0.5 - 1.0 GHz
dB
1.0 - 2.0 GHz
dB
VSWR
—
Ratio
Trise, Tfall
10% to 90% RF, 90% to 10% RF
µS
Ton, Toff
50% Control to 90% RF, 50% Control to 10% RF
µS
Transients
In-band
mV
7. The RF ports must be blocked outside of the package from ground or any other voltage.
Min.
—
—
35
30
—
—
—
—
—
—
Typ.
2.5
3.2
—
—
± 0.5
± 1.2
2:1
25
35
12
Rev. V5
Max.
2.7
3.5
—
—
± 0.8
± 1.5
—
—
—
—
SOIC-8
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.