AMC-183_V5 Datasheet, PDF (2/3 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Thin Film Amplifier

AM-183 / AMC-183
Cascadable Thin Film Amplifier,
28.5 dB Gain, 10 - 600 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25^oC
400 MHz
dB
27.5
28.5
Rev. V5
Max.
29.5
Frequency Response
—
10 - 600 MHz
dB
—
—
±1.5
Gain Variation with
Temperature
1 dB Compression
—
Output Power
10 - 600 MHz
dB
—
—
±1.2
10 - 600 MHz
dBm
+13
—
—
Noise Figure
—
10 - 500 MHz
dB
—
—
4.5
10 - 600 MHz
dB
—
—
5.0
Reverse Transmission
VSWR
—
10 - 600 MHz
dB
—
-35
-32
—
10 - 600 MHz
Ratio
—
—
2.0:1
Output IP₂
Output IP₃
Vbias
Two-Tone inputs up to 0 dBm
Two-Tone inputs up to 0 dBm
—
10 - 600 MHz
10 - 600 MHz
—
dBm
dBm
VDC
+30
+20
+14.5
—
—
+15.0
—
—
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
72
80
Power Dissipation
@ +15 V Bias
—
mW
—
1.1
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1.2 W must be
provided in use.
S-Parameter Data
equency
(MHz)
5
11
MAG/ANG
0.14/-148.3
S21
MAG/ANG
31.43/17.9
S12
MAG/ANG
0.01/1.9
S22
MAG/ANG
0.20/177.2
10
0.13/170.1
20
0.13/-178.3
50
0.12/179.2
100
0.11/-178.0
250
0.12/171.1
500
0.12/129.7
750
0.14/-44.0
32.36/6.3
32.65/-2.6
33.31/-13.6
33.09/-29.3
31.87/-71.9
29.37/-144.8
27.01/145.8
0.01/1.6
0.01/1.3
0.01/-0.5
0.01/-2.1
0.01/-9.3
0.01/-22.1
0.01/-45.8
0.12/92.7
0.09/69.8
0.06/-72.9
0.05/-98.1
0.06/-123.4
0.17/-153.9
0.25/178.1
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.