AMC-123_V4 Datasheet, PDF (2/3 Pages) M/A-COM Technology Solutions, Inc. – High Performance Amplifier

AM-123 / AMC-123
High Performance Amplifier,
10 dB Gain 5 - 500 MHz
Rev. V4
Electrical Specifications: ^2,3 Z₀ = 50Ω, V_CC = +15 V_DC
Parameter
Units
Typical
25ºC
Guaranteed
0º to 50ºC
-54º to +85ºC*
Frequency
Small Signal Gain (min)
Gain Flatness (max)
MHz
dB
dB
5-500
11.5
±0.3
5-500
10.0
±0.7
5-500
9.5
±1.0
Reverse Isolation
dB
16
Noise Figure (max)
dB
4.0
5.0
5.5
Power Output
@ 1 dB comp. (min)
dBm
19.0
18.0
17.5
IP3
dBm
+34
33
IP2
dBm
+48
40
Second Order Harmonic IP
dBm
+54
VSWR Input / Output (max)
1.5:1 / 1.5:1
1.9:1 / 1.9:1
2.0:1 / 2.0:1
DC Current @ 15 Volts (max)
mA
65
69
72
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1 W must be provided
in use.
S-Parameter Data
Frequency
(MHz)
S11
MAG/ANG
S21
MAG/ANG
S12
MAG/ANG
S22
MAG/ANG
5
0.21/-69.9
3.15/-158.8
0.11/171.3
0.15/92.8
10
0.11/-81.5
3.17/-172.2
0.11/175.0
0.06/116.1
20
0.08/-88.5
50
0.06/-108.4
100
0.05/-122.8
3.18/-178.4
3.17/162.9
3.14/142.8
0.12/171.7
0.13/159.9
0.13/141.4
0.04/139.8
0.03/174.7
0.04/-163.9
200
0.05/-141.8
3.11/104.8
0.13/102.1
0.04/-119.4
300
0.07/-155.4
3.09/66.9
0.12/64.9
0.14/-114.6
400
0.15/177.2
3.08/26.7
0.11/27.3
0.22/-153.2
500
0.20/151.3
3.05/-21.9
0.09/-20.9
0.25/83.4
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.