English
Language : 

AM-184-AMC-184 Datasheet, PDF (2/3 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Thin Film Amplifier
AM-184 / AMC-184
Cascadable Thin Film Amplifier,
20 dB Gain, 10 - 2000 MHz
Electrical Specifications: 2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25oC
1000 MHz
dB
19.0
20.0
Rev. V4
Max.
21.0
Frequency Response
Gain Variation with
Temperature
1 dB Compression
Noise Figure
—
—
Output Power
—
10 - 2000 MHz
dB
—
—
±1.5
10 - 2000 MHz
dB
—
—
±1.5
10 - 2000 MHz
dBm
+10
—
—
10 - 2000 MHz
dB
—
—
6.0
Reverse Transmission
VSWR
—
10 - 2000 MHz
dB
—
-30
-27
—
10 - 2000 MHz
Ratio
—
—
2.0:1
Output IP2
Output IP3
Vbias
Two-Tone inputs up to 0 dBm
Two-Tone inputs up to 0 dBm
—
10 - 2000 MHz
10 - 2000 MHz
—
dBm
dBm
VDC
+30
+20
+14.5
—
—
+15.0
—
—
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
52
60
Power Dissipation
@ +15 V Bias
—
mW
—
780
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1.0 W must be
provided in use.
S-Parameter Data
Frequency
(MHz)
10
S11
MAG/ANG
0.13/-171.5
S21
MAG/ANG
10.33/6.2
S12
MAG/ANG
0.03/4.5
S22
MAG/ANG
0.10/80.7
20
0.12/-175.9
10.18/0.3
0.03/2.8
0.08/47.2
40
0.12/174.6
10.48/-4.6
0.03/1.4
0.08/7.2
100
0.12/165.0
10.51/-15.7
0.03/-1.8
0.06/-38.9
200
0.12/149.1
10.42/-32.4
0.03/-4.8
0.05/-76.4
500
0.12/105.1
10.13/-79.8
0.03/-12.1
0.10/-131.1
1000
0.12/9.8
9.60/-156.4
0.03/-27.2
0.12/173.5
1500
0.14/-99.8
9.53/126.5
0.02/-51.5
0.14/-89.3
2000
0.28/176.9
9.63/53.4
0.01/-75.0
0.30/-142.7
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.