AM-182-AMC-182_15 Datasheet, PDF (2/3 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Thin Film Amplifier

AM-182 / AMC-182
Cascadable Thin Film Amplifier,
28 dB Gain, 5 - 1000 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25^oC
300 MHz
dB
27.2
28.2
Rev. V4
Max.
29.2
Frequency Response
—
5 - 1000 MHz
dB
—
—
±1.2
Gain Variation with
Temperature
1 dB Compression
—
Output Power
5 - 1000 MHz
dB
—
5 - 1000 MHz
dBm
+9
—
±1.2
—
—
Noise Figure
—
5 - 1000 MHz
dB
—
—
4.5
Reverse Transmission
VSWR
—
5 - 1000 MHz
dB
—
-36
-32
—
5 - 1000 MHz
Ratio
—
—
2.0:1
Output IP₂
Output IP₃
Vbias
Ibias
Power Dissipation
Two-Tone inputs up to 0 dBm
Two-Tone inputs up to 0 dBm
—
Vbias = +15.0 VDC
@ +15 V Bias
5 - 1000 MHz
5 - 1000 MHz
—
—
—
dBm
dBm
VDC
mA
mW
+28
+18
+14.5
—
—
—
—
+15.0
44
660
—
—
+15.5
50
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 800 mW must be
provided in use.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.