English
Language : 

AM-160 Datasheet, PDF (2/3 Pages) Tyco Electronics – Low Noise Amplifier, 28 dB Gain, 100 - 600 MHz
AM-160
Low Noise Amplifier, 28 dB Gain,
100 - 600 MHz
Electrical Specifications: 2,3 TA = -55°C to +85°C Case Temperature
Parameter
Gain
Test Conditions
@+25oC
Frequency
250 MHz
Units
dB
Min.
27.2
Typ.
28.2
Rev. V3
Max.
29.2
Frequency Response
Gain Variation with
Temperature
1 dB Compression
—
—
Output Power
100 - 600 MHz
dB
—
100 - 600 MHz
dB
—
100 - 600 MHz
dBm
+16
—
±1.25
—
±1.0
—
—
Noise Figure
—
100 - 600 MHz
dB
—
—
3.0
Reverse Transmission
VSWR
Output IP2
Output IP3
Vbias
—
—
Two-Tone inputs up to +5 dBm
Two-Tone inputs up to +5 dBm
—
100 - 600 MHz
100 - 600 MHz
100 - 400 MHz
100 - 600 MHz
100 - 600 MHz
—
dB
Ratio
Ratio
dBm
dBm
VDC
—
—
—
+36
+27
+14.5
-38
—
—
—
—
+15.0
-32
2.5:1
2:1
—
—
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
70
75
Power Dissipation
@ +15 V Bias
—
mW
—
1050
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1.2 W must be pro-
vided in use.
S-Parameter Data
Frequency
(MHz)
100
S11
MAG/ANG
0.14/126.3
S21
MAG/ANG
28.21/-5.6
S12
MAG/ANG
0.01/-18.0
S22
MAG/ANG
0.07/-73.4
150
0.12/56.7
28.30/-53.5
0.01/-68.5
0.08/-144.7
200
0.08/-15.5
27.45/-93.3
0.01/-108.2
0.09/150.5
250
0.17/-67.8
26.79/-126.3
0.01/-143.8
0.10/101.3
300
0.18/-87.7
25.37/-155.5
0.01/-178.1
0.12/64.4
350
0.18/-96.1
25.42/172.0
0.01/149.5
0.14/34.6
400
0.23/-115.4
24.92/141.7
0.02/120.6
0.11/4.7
500
0.27/175.5
25.67/78.7
0.02/59.1
0.10/-101.1
600
0.32/19.1
25.58/0.7
0.02/-14.6
0.24/143.7
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.