AM-155 Datasheet, PDF (2/3 Pages) Tyco Electronics – High Dynamic Range Amplifier, 12.5dB Gain, 300 - 1000 MHz

AM-155 / AMC-155
High Dynamic Range Amplifier,
12.5 dB Gain, 300 - 1000 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25^oC
600 MHz
dB
11.25
12.25
Rev. V4
Max.
13.25
Frequency Response
—
300 - 1000 MHz
dB
—
—
±0.5
Gain Variation with
Temperature
1 dB Compression
—
Output Power
300 - 1000 MHz
dB
—
—
±0.7
300 - 1000 MHz
dBm
+18
—
—
Noise Figure
Reverse Transmission
VSWR
Output IP₂
Output IP₃
Vbias
Ibias
Power Dissipation
—
—
Input
Output
Two-Tone inputs up to +5 dBm
Two-Tone inputs up to +5 dBm
—
Vbias = +15.0 VDC
@ +15 V Bias
300 - 700 MHz
300 - 1000 MHz
300 - 1000 MHz
300 - 1000 MHz
300 - 1000 MHz
300 - 1000 MHz
—
—
—
dB
dB
dB
Ratio
Ratio
dBm
dBm
VDC
mA
mW
—
—
—
—
—
+40
+27
+14.5
—
—
—
—
-14
—
—
—
—
+15.0
50
750
4.0
5.5
-10
2.0:1
3.0:1
—
—
+15.5
60
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 0.8W must be provided
in use.
S-Parameter Data
Frequency
(MHz)
300
S11
MAG/ANG
0.30/42.3
S21
MAG/ANG
4.05/166.3
S12
MAG/ANG
0.18/173.3
S22
MAG/ANG
0.36/87.8
350
0.26/12.9
4.12/153.2
0.18/161.3
0.33/80.5
400
0.24/-25.7
4.13/142.0
0.19/150.6
0.30/76.2
500
0.20/-88.2
4.03/122.0
0.20/131.8
0.28/73.4
600
0.23/-123.0
3.94/104.9
0.20/115.3
0.27/67.8
700
0.26/-144.7
3.88/89.4
0.21/100.1
0.28/51.3
800
0.29/-163.9
3.88/74.5
0.21/85.2
0.28/21.3
900
0.27/175.6
4.01/59.5
0.22/69.8
0.30/-20.2
1000
2
0.25/147.1
4.22/41.3
0.23/53.6
0.32/-63.0
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.