AM-143 Datasheet, PDF (2/3 Pages) Tyco Electronics – Low Noise Amplifier, 16dB Gain, 5 - 500 MHz

AM-143 / AMC-143
Low Noise Amplifier, 16 dB Gain,
5 - 500 MHz
Electrical Specifications: ^2, TA = -55°C to +85°C Case Temperature
Parameter
Gain
Test Conditions
@+25^oC
Frequency
50 MHz
Units
dB
Min.
15.3
Typ.
15.8
Rev. V4
Max.
16.3
Frequency Response
—
5 - 500 MHz
dB
—
Gain Variation with
Temperature
1 dB Compression
—
Output Power
5 - 500 MHz
dB
—
5 - 500 MHz
dBm
+4
Noise Figure
Reverse Transmission
VSWR
Output IP₂
Output IP₃
Vbias
Ibias
Power Dissipation
—
—
—
Two-Tone inputs up to -10 dBm
Two-Tone inputs up to -10 dBm
—
Vbias = +15.0 VDC
@ +15 V Bias
5 - 500 MHz
5 - 100 MHz
5 - 500 MHz
5 - 500 MHz
5 - 500 MHz
5 - 500 MHz
—
—
—
dB
dB
Ratio
dBm
dBm
VDC
mA
mW
—
—
—
—
+24
+16
+14.5
—
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
S-Parameter Data
Frequency
(MHz)
5
S11
MAG/ANG
0.20/-60.7
S21
MAG/ANG
5.90/-161.0
S12
MAG/ANG
0.09/-160.5
—
—
—
—
—
-21
—
—
—
+15.0
13
200
±1.0
±0.8
—
3.5
2.7
-16
2.5:1
—
—
+15.5
15
—
S22
MAG/ANG
0.32/-24.9
10
0.12/-63.8
20
0.09/-65.3
50
0.10/-82.7
100
0.14/-101.0
200
0.21/-130.6
300
0.23/-149.2
400
0.20/-155.5
500
0.22/-142.9
6.07/-171.8
6.16/-179.8
6.08/167.5
6.06/153.3
6.00/126.7
6.01/100.9
6.09/70.7
6.11/36.8
0.09/-172.6
0.10/178.9
0.10/166.3
0.10/150.5
0.10/119.8
0.10/93.6
0.10/67.4
0.10/43.3
0.27/-24.9
0.26/-17.4
0.25/-28.0
0.26/-49.3
0.26/-82.3
0.24/-104.5
0.22/-100.5
0.20/-79.8
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.