AM-123 Datasheet, PDF (2/3 Pages) Tyco Electronics – High Performance Amplifier, 10 dB Gain 5 - 500 MHz

AM-123 / AMC-123
High Performance Amplifier,
10 dB Gain 5 - 500 MHz
Electrical Specifications: ^2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency Units
Min.
Typ.
Gain
@+25^oC
50 MHz
dB
9.4
10.0
Rev. V3
Max.
10.6
Frequency Response
—
5 - 500 MHz
dB
—
—
±0.7
Gain Variation with
Temperature
1 dB Compression
Noise Figure
—
Output Power
—
5 - 500 MHz
dB
—
—
±1.0
5 - 500 MHz
dBm
+16
—
—
10 - 300 MHz
dBm
+19
—
—
5 - 500 MHz
dB
—
—
7.5
10 - 300 MHz
dB
—
—
5.5
Reverse Transmission
VSWR
—
5 - 500 MHz
dB
—
-18
-15
—
5 - 500 MHz
Ratio
—
—
2.5:1
10 - 400 MHz
Ratio
—
—
2:1
Output IP₂
Output IP₃
Vbias
Ibias
Power Dissipation
Two-Tone inputs up to +10 dBm
Two-Tone inputs up to +10 dBm
—
Vbias = +15.0 VDC
@ +15 V Bias
5 - 500 MHz
10 - 300 MHz
5 - 500 MHz
10 - 300 MHz
—
—
—
dBm
dBm
dBm
dBm
VDC
mA
mW
+33
+40
+22
+32
+14.5
—
—
—
—
—
—
+15.0
62
930
—
—
—
—
+15.5
75
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1 W must be provided
in use.
S-Parameter Data
Frequency
(MHz)
S11
MAG/ANG
S21
MAG/ANG
S12
MAG/ANG
S22
MAG/ANG
5
0.21/-69.9
3.15/-158.8
0.11/171.3
0.15/92.8
10
0.11/-81.5
3.17/-172.2
0.11/175.0
0.06/116.1
20
0.08/-88.5
50
0.06/-108.4
100
0.05/-122.8
3.18/-178.4
3.17/162.9
3.14/142.8
0.12/171.7
0.13/159.9
0.13/141.4
0.04/139.8
0.03/174.7
0.04/-163.9
200
0.05/-141.8
3.11/104.8
0.13/102.1
0.04/-119.4
300
0.07/-155.4
3.09/66.9
0.12/64.9
0.14/-114.6
400
0.15/177.2
3.08/26.7
0.11/27.3
0.22/-153.2
500
0.20/151.3
3.05/-21.9
0.09/-20.9
0.25/83.4
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.