1N5711 Datasheet, PDF (2/3 Pages) STMicroelectronics – SMALL SIGNAL SCHOTTKY DIODE

1N5711, 1N5712,
MADS-005711, MADS-005712
General Purpose Axial Lead Glass Packaged Schottky Diodes
Rev. V2
Absolute Maximum Ratings^2,3
Parameter
Absolute Maximum
Reverse Voltage
Power Dissipation
Soldering Temperature
Operating Temperature
See voltage ratings
250 mW
Derate linearly to 0 @ 135°C
+230°C for 5 seconds
1 mm from glass
-65°C to +150°C
Storage Temperature
-65°C to +200°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. MACOM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These electronic devices are sensitive to
electrostatic discharge (ESD) and can be damaged
by static electricity. Proper ESD control techniques
should be used when handling these HBM Class 0
devices.
Package Outline Dimensions
A
B
C
D
(2 plcs)
Dimension
A
B
C
D (min.)
Mils
155 ± 10
71 ± 3
15 ± 1
1000
mm
3.94 ± 0.25
1.8 ± 0.08
0.38 ± 0.03
25.4
Assembly Recommendations
 Leads on axial leaded devices must be formed
while being held firm. Bending the leads too
close to the body of the part may cause internal
damage to the device. Bends <0.060” from body
are not recommended. Appropriate fixturing
should be used.
 Devices may be soldered using standard 60/40,
Sn/Pb or RoHS compliant solders. Axial leads
are tin plated, 50 μM, thick to ensure an
optimum connection.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support