English
Language : 

M02097-11 Datasheet, PDF (16/21 Pages) M/A-COM Technology Solutions, Inc. – 3.3/5V LED Driver / Limiting Amplifier for Operation to 500 Mbps
Pin Definitions
Table 2-1.
QFN Pin
Number
21
22
23
24
25
26
27
28
29
30
31
32
M02097 Pad / Pin Descriptions (2 of 2)
Pin Name
Function
VCC3T
CPB
STSET
VCC3R
RxINp
RxINm
Config1
Config2
Config3
Config4
LOS-ST
IREF
Internally regulated voltage for LED driver circuitry in 5V applications. Connect directly to supply to allow wider
power supply tolerance in 3.3V-only applications (internal regulator not in use). Do not connect to power supply if
VCC = 5V.
A capacitor at this pin sets the compensation for the pre-bias control. Connect a capacitor between this pin and
VCC3 if pre-bias control is used. Can leave floating if not using pre-bias.
Loss of signal threshold setting input. Connect a resistor between this pin and VCC3 to set loss of signal threshold.
Internally regulated voltage for limiting amplifier circuitry in 5V applications. Connect directly to supply to allow
wider power supply tolerance in 3.3V-only applications (internal regulator not in use). Do not connect to power
supply if VCC = 5V.
Non-inverting limiting amplifier data input. Internally terminated with 2 kΩ to self-bias voltage of approximately
VCC3R - 0.5V.
Inverting limiting amplifier data input. Internally terminated with 2 kΩ to self-bias voltage of approximately
VCC3R - 0.5V.
Configuration logic input. These pins select LED driver and limiting amplifier configurations and test modes. Refer
to Configuration Logic table (Table 1-9) for more information. Three level logic where nominal level is mid-range
(VCC3T / 2) when floating.
Limiting amplifier LOS or ST (signal detect) output (M02097-11 PECL, M02097-21 CMOS). Configuration logic
selects whether output is to be LOS or ST. 5V compatible when using a 5V supply.
Internal reference current. Must be connected to ground through a 12.4 kΩ 1% resistor.
02097-DSH-001-C
Mindspeed Technologies®
14
Preliiminary Information/Mindspeed Proprietary and Confidential