XX1000-BD Datasheet, PDF (1/8 Pages) Mimix Broadband – 7.5-25.0/15.0-50.0 GHz GaAs MMIC Active Doubler

XX1000-BD
Active Doubler
7.5-25.0/15.0-50.0 GHz
Features
 Excellent Broadband Mixer Driver
 Single Ended Fed Doubler with Distributed Buffer
Amplifier
 Excellent LO Driver for M/A-COM Tech
Receivers
 +15 dBm Output Drive
 100% On-Wafer RF, DC and Output Power
Testing
 100% Visual Inspection to MIL-STD-883 Method
2010
 RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM Tech’s single ended fed (no external
balun required) 7.5-25.0/15.0-50.0 GHz GaAs MMIC
doubler has a +15.0 dBm output drive and is an
excellent LO doubler that can be used to drive
fundamental mixer devices. It is also well suited to
drive M/A-COM Tech's XR1002 receiver device.
This MMIC uses M/A-COM Tech’s GaAs PHEMT
device model technology, and is based upon
electron beam lithography to ensure high
repeatability and uniformity. The chip has surface
passivation to protect and provide a rugged part with
backside via holes and gold metallization to allow
either a conductive epoxy or eutectic solder die
attach process. This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Ordering Information
Part Number
Package
XX1000-BD-000V
vacuum release gel paks
XX1000-BD-EV1
evaluation board
Chip Device Layout
Rev. V1
Absolute Maximum Ratings¹
Parameter
Absolute Max.
Supply Voltage (Vd)
Supply Voltage (Vss)
Supply Current (Id)
Supply Current (Iss)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
-6.0 VDC
300 mA
60 mA
+0.3 VDC
+12.0 dBm
-65 °C to +165 °C
-55 °C to MTTF Table¹
MTTF Table¹
(1) Channel temperature directly affects a device's MTTF. Channel tem-
perature should be kept as low as possible to maximize lifetime.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.