XP1044-QL_15 Datasheet, PDF (1/10 Pages) M/A-COM Technology Solutions, Inc. – 3W Power Amplifier Module

XP1044-QL
3W Power Amplifier Module
4.0-5.9 GHz
Features
 34 dBm P1dB
 Pout 26 dBm @ EVM = 2.5% (PAR=9.17 dB)
 46 dBm OIP3
 18.5 dB Gain
 8V Voltage Supply
 Input Internally Matched
 7x7mm Surface Mount Package
 Ideal for WiMAX Applications @ 5.8 GHz and
 Applications between 4 GHz and 5 GHz
 RoHS* Compliant and 260°C Reflow Compatible
Functional Block Diagram
Pin 1 Indicator
Pin-out Details:
Rev. V2
Description
The XP1044 is a highly linear 2-stage power
amplifier capable of 18.5 dB of gain, 34 dBm of
power at 1 dB compression and is housed in an
RoHS compliant 7x7mm package. The XP1044
provides less than 2.5% EVM at 26 dBm output
power with 802.16 OFDM signal and peak to
average ratio 9.17 dB. The input and output of the
device are internally pre-matched facilitating a
simplified input and output match. This product
operates off an 8V voltage supply and requires
negative voltage which is used for current control.
The XP1044-QL is specifically designed for WiMAX
applications between 4.9 GHz and 5.9 GHz, and the
performance can be shifted by adding external
matching components to cover applications between
4.0 GHz and 5.0 GHz.
Ordering Information
Part Number
Package
XP1044-QL-0N00
bulk quantity
XP1044-QL-EV1
evaluation module
for 4.9 GHz ~ 5.9 GHz
XP1044-QL-EV2
evaluation module
for 4.0 GHz ~ 5.0 GHz
Pin Configuration
Pin No. Function
3,4,5
8
RF IN
VG!
9
VG2
17,18,19
RF OUT
Pin No.
23
22
1,2,6,7,10,
11,12,13,
14,15,16,
20,21,24,
25,26,27,
28
Function
VD1
VD2
GND
Absolute Maximum Ratings
Parameter
Absolute Max.
Drain Supply Voltage (Vd)
+9.0 V
Gate Supply Voltage (Vg)
0 V ~ -5 V
RF Input Power (RFin)
+23 dBm
Stage 1 Current (Idd1)
375 mA
Stage 2 Current (Idd2)
750 mA
Power Dissipation (PDC)
Storage Temperature
Junctions Temperature
Operating Temperature (Ta)
ESD (HBM)
Moisture Sensitivity level
Thermal Resistance (Rth)¹
9,0 W
-55 °C to +150 °C
175 °C
-40 °C to See Note 2
Class 1A
MSL3
15.6 °C
(1) *Thermal resistance of stage 2 only
(2) Calculate maximum operating backside temperature using: Tmax =
167 °C – [Vd*Idd2*Rth]. Thermal resistance of the 1st stage is 2x Rth
of the output stage, and therefore Idd1 must not exceed ½ Idd2 for a
specific maximum temperature
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.