XM1001-QH_15 Datasheet, PDF (1/6 Pages) M/A-COM Technology Solutions, Inc. – Image Reject Mixer

XM1001-QH
Image Reject Mixer
10.0-33.0 GHz
Features
 Fundamental Image Reject Mixer
 9.0 dB Conversion Loss
 20.0 dB Image Rejection
 +25.0 dBm Input Third Order Intercept (IIP3)
 4x4 mm, QFN
 RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM Tech’s 10.0-33.0 GHz GaAs MMIC
fundamental image reject mixer with high linearity
has a conversion loss of 9.0 dB with a 20.0 dB
image rejection across the band. I and Q mixer
outputs are provided and an external 90 degree
hybrid is required to select the desired sideband.
This MMIC uses M/A-COM Tech’s GaAs PHEMT
device model technology, and is based upon
electron beam lithography to ensure high
repeatability and uniformity. The device comes in a
low-cost 4x4 mm QFN surface mount plastic
package. This device is well suited for Millimeter-
wave Point-to-Point Radio, LMDS, SATCOM and
VSAT applications.
Ordering Information
Part Number
XM1001-QH-0G00
XM1001-QH-0G0T
XM1001-QH-EV1
Package
bulk quantity
tape and reel
evaluation module
Functional Block Diagram
Rev. V1
Pin Configuration
Pin No. Function
1-3
4
5-8
9
10-14
15
GND
RF IN
GND
IF2
GND
LO IN
Pin No.
16-19
20
21
22
23-24
Function
GND
VG
GND
IF2
GND
Absolute Maximum Ratings
Parameter
Absolute Max.
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
+0.3 VDC
+20.0 dBm
+20.0 dBm
-65 °C to +165 °C
-55 °C to +125 °C
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.