XL1010-BD_15 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Low Noise Amplifier

XL1010-BD
Low Noise Amplifier
20.0-38.0 GHz
Features
 17.0 dB Small Signal Gain
 3.0 dB Noise Figure
 Single, Positive Bias Supply
 100% On-Wafer RF Testing
 RoHS* Compliant and 260°C Reflow Compatible
Chip Device Layout
Rev. V1
Description
M/A-COM Tech’s three stage 20.0-38.0 GHz GaAs
MMIC low noise amplifier has a small signal gain of
17.0 dB with a noise figure of 3.0 dB. The device
uses M/A-COM Tech’s GaAs PHEMT device model
technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity. The device is well suited to multiple
receiver applications which require broadband
performance with simple bias requirements.
Ordering Information
Part Number
Package
XL1010-BD-000X
Where “X” is RoHS compli-
ant die packed in “V” – vac-
uum released gel paks or
“W” – waffle trays
XL1010-BD-EV1
evaluation module
Absolute Maximum Ratings
Parameter
Absolute Max.
Supply Voltage (Vd)
+7.0 VDC
Supply Current (Id1,2,3)
70 mA
Input Power (Pin)
+12.0 dBm
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
-65 to +165 ºC
-55 to MTTF Graph¹
MTTF Graph¹
(1) Channel temperature directly affects a device's MTTF. It is recom-
mended to keep channel temperature as low as possible to maximize
lifetime.
Electrical Specifications: 20-38 GHz (Ambient Temperature T = 25°C)
Parameter
Units
Min.
Typ.
Input Return Loss (S11)
Output Return Loss (S22)
Small Signal Gain (S21)
Gain Flatness (S21)
Reverse Isolation (S12)
Noise Figure (NF)
Output Power for 1dB Compression (P1dB)
Drain Bias Voltage (Vd)
Supply Current (Id)
dB
-
12.0
dB
-
15.0
dB
-
17.0
dB
-
+/-2.0
dB
-
45.0
dB
-
3.0
dBm
-
TBD
VDC
3.0
4.0
mA
-
45
Max.
-
-
-
-
-
-
-
5.0
60
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.