XL1000-BD_15 Datasheet, PDF (1/9 Pages) M/A-COM Technology Solutions, Inc. – Low Noise Amplifier

XL1000-BD
Low Noise Amplifier
20.0-40.0 GHz
Features
 Self Bias Architecture
 Small Size
 3.0 or 5.0 V Operation
 20.0 dB Small Signal Gain
 2.0 dB Noise Figure
 +9.0 dBm P1dB Compression Point
 100% On-Wafer RF, DC and Noise Figure
Testing
 100% Visual Inspection to MIL-STD-883 Method
2010
 RoHS* Compliant and 260°C Reflow Compatible
Description
M/A-COM Tech’s three stage 20.0-40.0 GHz GaAs
MMIC low noise amplifier has a small signal gain of
20.0 dB with a noise figure of 2.0 dB across the
band. This MMIC uses M/A-COM Tech’s GaAs
PHEMT device model technology, and is based
upon electron beam lithography to ensure high
repeatability and uniformity. The chip has surface
passivation to protect and provide a rugged part with
backside via holes and gold metallization to allow
either a conductive epoxy or eutectic solder die
attach process. This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Chip Device Layout
Rev. V1
Absolute Maximum Ratings
Parameter
Absolute Max.
Supply Voltage (Vd)
Supply Current (Id)
Input Power (Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)¹
+7.0 VDC
70 mA
+12 dBm
-65 °C to +165 °C
-55 °C to +85 °C
+175 °C
1. Channel temperature directly affects a device's MTTF. Chan-
nel temperature should be kept as low as possible to maximize
lifetime.
Ordering Information
Part Number
Package
XL1000-BD-000V
“V” - vacuum release
gel paks
XL1000-BD-EV1
evaluation module
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.