TP-104 Datasheet, PDF (1/2 Pages) Tyco Electronics – RF Pulse Transformer 750 kHz - 400 MHz

TP-104
RF Pulse Transformer,
750 KHz - 400 MHz
Features
• 50 Ohms Unbalanced/200 Ohms Balanced
• Low Insertion Loss: 0.4 dB Typical
• DC Isolation: Input to Output
• MIL-STD-202 Screening Available
Description
The flux coupled Balun Transformer can provide a
wide range of impedance ratios: 1:1, 4:1, 9:1 and
16:1 are most common. DC isolation from primary
coil to secondary coil is also a feature of this device.
FP-1
Schematic/Pin Configuration
Rev. V3
.
Electrical Specifications: T_A = -55°C to +85°C
Parameter
Impedance
Insertion Loss
VSWR
Input Power
Rise Time
Droop (10%)
Test Conditions
Input - 50 Ohms Unbalanced
Output - 200 Ohms Balanced
Frequency
—
Units
Min
Typ
Max
—
—
—
—
—
10 - 50 MHz
dB
—
—
0.55
—
5 MHz - 200 MHz
Ratio
—
—
1.3:1
750 MHz - 400 MHz Ratio
—
—
2.0:1
10 - 90%
—
750 MHz - 4 MHz
Watts
—
4 MHz - 400 MHz
Watts
—
—
0.4
—
1.0
—
nS
—
0.55
—
—
nS
—
130
—
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.