SW-456_V5 Datasheet, PDF (1/4 Pages) M/A-COM Technology Solutions, Inc. – GaAs SPDT Switch

SW-456
GaAs SPDT Switch
DC - 3.0 GHz
Rev. V5
Features
• Low Cost Plastic: SC-70 (SOT-363) Package
• Low Insertion Loss: < 0.3 dB @ 900 MHz
• Low Power Consumption: < 15 µA @ -2.3 Volts
• Positive or Negative 2.3 to 8 Volt Control
Description
M/A-COM’s SW-456 is a GaAs monolithic switch in a
low cost SC-70 (SOT-363) surface mount plastic
package. The SW-456 is ideally suited for
applications where very low power consumption, low
insertion loss, very small size and low cost are
required. Typical applications are in dual band
systems where switching between small signal
components is required, i.e. filter banks, single-band
LNA’s, converters, etc. The SW-456 can be used in
applications up to 0.25 watts in systems such as
cellular, PCS, DCS1800, GSM, CDMA,
W-CDMA and other analog/digital wireless
communication systems.
The SW-456 is fabricated using a mature 0.5 micron
PHEMT process. The process features full
passivation for performance and reliability.
Ordering Information ¹
Functional Schematic
Positive Control Voltage
PIN 1
RF1
1000 pF
GND
RF2
1000 pF
V1
RFC
1000 pF
V2
Functional Schematic
Negative Control Voltage
PIN 1
RF1
V1
GND
RFC
Part Number
Package
RF2
V2
SW-456 PIN
Bulk Packaging
SW-456TR
SW-456TR-3000
1000 piece reel
3000 piece reel
Pin Configuration
SW-456SMB
Sample Test Board
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings ²
Parameter
Input Power (0.5 - 3.0 GHz)
3 V Control
5 V Control
Operating Voltage
Operating Temperature
Absolute Maximum
+30 dBm
+33 dBm
+8.5 volts
-40°C to +85°C
PIN
Function
1
RF1
2
GND
3
RF2
4
V2
5
RFC
6
V1
Description
RF In/Out
RF Ground
RF In/Out
V_CTRL2
RF Common
V_CTRL1
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.