SMPP-SERIES Datasheet, PDF (1/9 Pages) M/A-COM Technology Solutions, Inc. – Surface Mount Plastic PIN Diodes

SMPP Series
Surface Mount Plastic PIN Diodes
Features
• Industry Standard Surface Mount Packages
• Lead-Free (RoHS Compliant) Equivalents
Available with 260 °C Reflow Compatibility
• Low Loss, High Isolation Switching Diodes
• Low Distortion Attenuator Diodes
• Single and Dual Diode Configurations
• Tape and Reel Packaging
Rev. V19
SOT-23
Package Outlines
SOT-143
SOT-323
SOD-323
SC-79
Description and Applications
M/A-COM Technology Solutions offers silicon PIN diodes
in five standard, low cost, surface mount plastic packages
for use as switches and attenuators. The diodes are
offered with standard Sn/Pb plating, as well as with 100%
matte Sn plating on our RoHS compliant devices. These
PIN diodes feature a variety of I-region lengths resulting in
lower resistance, and lower capacitance devices for
various microwave control circuit applications.
The MA4P275 / MA4P7436 / MADP-007436 series offer
the lowest series resistance for best performance as low
loss series switches and high isolation shunt switches.
The MA4P789 / MA4P7433 / MADP-007433 series have
the lowest capacitance and offers the highest isolation in
series and series-shunt switches through 3GHz.
The MA4P282 / MA4P7447 / MADP-007155 series, the
MA4P274 / MA4P7455 / MADP-007455 series and the
MADP-007448 series are general purpose PIN diodes
useful as either switches or attenuators.
The MA4P277 / MA4P7437 / MADP-007437 series and
MA4P278 / MA4P7438 / MADP-007438 series device
have thicker intrinsic regions to provide lower distortion in
attenuator circuits.
The MA4P290/MADP-007167 series devices have the
thickest I-Region, offering the lowest distortion and highest
IP3 for current controlled attenuator circuits. These
devices are ideal for AGC functions for infrastructure and
The diodes are come in various chip configurations and
are available as single diodes, series tees (ST), series tee
reverse (STR), common cathode pairs (CK), common
anode pairs (CA), and unconnected pairs in the respective
featured packages.
M/A-COM’s PIN diodes are available in the SOT-23 (case
style 287), the SOT-143 (case style 1068), the SOT-323/
SC-70 (3L) (case style 1146), the SOD-323 (case style
1141), and the SC-79 (case style 1279) packages. These
packages are supplied on tape and reel for automatic pick
and place assembly. The tape and reel suffix designation
is a “T” at the end of the part number.
Absolute Maximum Power Ratings @ 25 °C¹
Parameter
Operating Temperature
Storage Temperature
Junction Temperature
Reverse Voltage
Forward Current
Absolute
Maximum
-65°C to +150 °C
-65°C to +125 °C
+ 175 °C
Voltage Rating (See Table)
150 mA DC
1. Operation of these devices above any one of these
parameters may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product MA-COM Technical Solutions is • North America Tel: [phone] / Fax: [phone]
considering for development. Performance is based on target specifications, simulated results, and/
or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product MA-COM Technical Solutions
has under development. Performance is based on engineering tests. Specifications are typical.
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.
Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commit- _{MA-COM Technical Solutions and its affiliates reserve the right to make changes to the}
ment to produce in volume is not guaranteed.
product(s) or information contained herein without notice.