English
Language : 

SMA26 Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Cascadable Amplifier 10 to 1500 MHz
A26 / SMA26
Cascadable Amplifier
10 to 1500 MHz
Features
• HIGH GAIN - TWO STAGES: 20.5 dB (TYP.)
• HIGH OUTPUT LEVEL: +15 dBm (TYP.)
• LOW VSWR: <1.4:1 (TYP.)
Product Image
Description
The A26 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for consistent performance
and high reliability.
This 2 stage bipolar transistor feedback amplifier design displays
impressive performance over a broadband frequency range. An
active DC biasing network insures temperature-stable
performance.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available
Ordering Information
Part Number
A26
SMA26
CA26
Package
TO-8
Surface Mount
SMA Connectorized **
Rev. V4
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Absolute Maximum Ratings
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
Units
Typical
25ºC
MHz 10-1600
dB
20.5
dB
±0.4
dB
28
dB
5.0
dBm
16.0
Guaranteed
0º to 50ºC -54º to +85ºC*
10-1500
10-1500
19.0
18.5
±0.6
±0.8
5.5
6.0
15.0
14.5
Parameter
Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature
+125ºC
DC Voltage
+17 V
Continuous Input Power
+10 dBm
Short Term Input power
(1 minute max.)
100 mW
Peak Power (3 µsec max.)
0.5 W
“S” Series Burn-In
Temperature (case)
+125ºC
IP3
dBm
+27
IP2
dBm
+45
Second Order Harmonic IP dBm
+51
VSWR Input / Output (max)
1.4:1 / 1.4:1 1.7:1 / 1.7:1
DC Current @ 15 Volts (max) mA
64
67
2.0:1 / 2.3:1
70
Thermal Data: VCC = +15 VDC
Parameter
Thermal Resistance θjc
Transistor Power Dissipation Pd
Junction Temperature Rise
Above Case Tjc
Rating
145ºC/W
0.394 W
+57ºC
* Over temperature performance limits for part number CA26, guaranteed from 0oC to +50oC only.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.