SM5T17 Datasheet, PDF (1/2 Pages) Tyco Electronics – Wideband Load Insensitive Mixer

SM5T17
Wideband Load Insensitive Mixer
Features
• LO 50 TO 5000 MHz
• RF 50 TO 5000 MHz
• IF 50 TO 3000 MHz
• LO DRIVE +17 dBm (NOMINAL)
• INSENSITIVE TO SYSTEM LOAD MISMATCH
• HIGH INTERCEPT: +24 dBm (TYP.)
Description
The SM5T17 is a termination insensitive mixer, designed for use
in military, wireless and test equipment applications. The design
utilizes Schottky bridge quad diodes, broadband ferrite baluns and
internal loads to provide excellent performance without
degradation due to external VSWR mismatches. Environmental
screening available to MIL-STD-883, MIL-STD-202 or
MIL-DTL-28837, consult factory.
Product Image
Rev. V2
Ordering Information
Part Number
SM5T17
Package
Surface Mount
Electrical Specifications: Z₀ = 50Ω Lo = +17 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -40º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 0.05 to 1.5 GHz, fL = 0.05 to 1.5 GHz, fI = 0.05 to 1.5 GHz
fR = 1.5 to 3.0 GHz, fL = 1.5 to 3.0 GHz, fI = 0.05 to 3.0 GHz
fR = 3.0 to 5.0 GHz, fL = 3.0 to 5.0 GHz, fI = 0.05 to 3.0 GHz
dB
dB
dB
6.9
7.5
8.5
8.3
8.8
10.5
9.0
9.5
11.2
Isolation, L to R (min)
Isolation, L to I (min)
fL = 0.05 to 1.0 GHz
fL = 1.0 to 5.0 GHz
fL = 0.05 to 1.0 GHz
fL = 1.0 to 5.0 GHz
dB
35
25
23
dB
33
23
21
dB
40
32
30
dB
35
25
23
Isolation, R to I (min)
fR = 0.05 to 5.0 GHz
dB
32
1 dB Conversion Comp.
Input IP3
VSWR
fL = +17 dBm
fL = 0.05 to 5.0 GHz, fR = 0.05 to 5.0 GHz,
fI = 0.05 to 3.0 GHz
R-Port fR = 0.05 to 5.0 GHz,
L-Port fL = 0.05 to 5.0 GHz,
I-Port fI =0.05 to 3.0 GHz
dBm
dBm
+13
+24
1.6:1
1.5:1
1.4:1
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.