SM4TH Datasheet, PDF (1/2 Pages) M/A-COM Technology Solutions, Inc. – Load Insensitive Mixer

SM4TH
Load Insensitive Mixer
Features
• LO 1 TO 3400 MHz
• RF 1 TO 3400 MHz
• IF 1 TO 2000 MHz
• LO DRIVE: +23 dBm (NOMINAL)
• INSENSITIVE TO SYSTEM MISMATCH
• HIGH INTERCEPT: +29 dBm (TYP.)
• AVAILABLE IN SURFACE MOUNT
• +260°C REFLOW COMPATIBLE
Product Image
Description
The SM4TH is a termination insensitive mixer, designed for use in mili-
tary, commercial and test equipment applications. The design utilizes
Schottky bridge quad diodes, broadband ferrite baluns and internal loads
to provide excellent performance without degradation due to external
VSWR mismatches. Environmental screening available to MIL-STD-883,
MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
SM4TH
Package
Surface Mount
Rev. V4
Electrical Specifications: Z₀ = 50Ω Lo = +23 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise fR = 0.005 to 2.0 GHz, fL = 0.005 to 2.0 GHz, fI = 0.001 to 0.5 GHz
dB
7.0
Figure (max)
fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz , fI = 0.001 to 2.0 GHz
dB
9.0
8.0
10.5
8.5
11.0
Isolation, L to R (min)
Isolation, L to I (min)
Isolation, R to I (min)
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fL = 0.01 to 1.5 GHz
fL = 0.01 to 3.4 GHz
fR = 0.001 to 3.4 GHz
dB
35
30
29
dB
35
22
21
dB
40
30
29
dB
35
25
24
dB
21
1 dB Conversion Comp.
Input IP3
fL= +23 dBm
fR1 = 2 GHz at 0 dBm, fR2 = 2.01 GHz at 0 dBm,
fL = 1.9 GHz at +23 dBm
dBm
+17
dBm
+29
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.