SM4B Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Double-Balanced Mixer

M4B / SM4B
Double-Balanced Mixer
Features
• LO 10 TO 1500 MHz
• RF 10 TO 1500 MHz
• IF DC TO 1000 MHz
• LO DRIVE: +13 dBm (NOMINAL)
• HIGH ISOLATION: 35 dB (TYP.)
• AVAILABLE IN SURFACE MOUNT
Description
The M4B is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC cou-
pled to the diodes. Environmental screening is available to MIL-
STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Product Image
Rev. V4
Part Number
M4B
SM4B
Package
Flatpack
Surface Mount
Electrical Specifications: Z₀ = 50Ω Lo = +13 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 0.01 to 1.2 GHz, fL =0.01 to 1.2 GHz, fI =0.0004 to 0.2 GHz
fR = 0.01 to 1.5 GHz, fL =0.01 to 1.5 GHz, fI =0.0004 to 0.2 GHz
fR = 0.01 to 1.5 GHz, fL =0.01 to 1.5 GHz, fI =0.0004 to 1 GHz
dB
dB
dB
7.5
8.0
8.5
8.5
9.0
9.5
9.0
9.5
10.0
Isolation, L to R (min)
fL = 0.01 to 0.6 GHz
fL = 0.6 to 1.2 GHz
fL = 1.2 to 1.5 GHz
dB
45
35
33
dB
35
25
23
dB
28
22
20
Isolation, L to I (min)
1 dB Conversion Comp.
Input IP3
fL = 0.1 to 0.6 GHz
fL = 0.6 to 1.2 GHz
fL = 1.2 to 1.5 GHz
fL @ +13 dBm
dB
40
30
28
dB
30
25
23
dB
23
18
16
dBm
+7
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.