SM2E Datasheet, PDF (1/3 Pages) M/A-COM Technology Solutions, Inc. – Double-Balanced Mixer

M2E / M2EC / SM2E
Double-Balanced Mixer
Features
• LO 10 TO 1000 MHz
• RF 10 TO 1000 MHz
• F DC TO 600 MHz
• LO DRIVE: +20 dBm (nominal)
• HIGH INTERCEPT POINT: +30 dBm (TYP.)
• HERMETICALLY SEALED
Description
The M2E is a double balanced mixer, designed for use in military,
commercial, and test equipment applications. The design utilizes
Schottky ring quad diodes and broadband ferrite baluns to attain
excellent performance. This mixer can also be used as a phase
detector and/or bi-phase modulator since the IF port is DC cou-
pled to the diodes. Environmental screening is available to MIL-
STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory.
Ordering Information
Part Number
M2E
M2EC
SM2E
Package
TO-8
SMA Connectorized
Surface Mount
Product Image
Rev. V4
Electrical Specifications: Z₀ = 50Ω Lo = +20 dBm (Downconverter application only)
Parameter
Test Conditions
Typical
Units
Guaranteed
+25ºC -54º to +85ºC *
SSB Conversion Loss
(max) & SSB Noise
Figure (max)
fR = 0.01 to 0.3 GHz, fL = 0.01 to 0.3 GHz, fI = 0.01 to 0.2 GHz
fR = 0.01 to 0.3 GHz, fL = 0.01 to 0.3 GHz , fI = 0.01 to 0.6 GHz
fR = 0.01 to 1 GHz, fL = 0.01 to 1 GHz, fI = 0.01 to 0.2 GHz
fR = 0.01 to 1 GHz, fL = 0.01 to 1 GHz , fI = 0.01 to 0.6 GHz
dB
dB
dB
dB
7.0
8.0
8.5
10.0
7.5
9.0
9.5
11.0
7.8
9.3
9.8
11.3
Isolation, L to R (min)
Isolation, L to I (min)
1 dB Conversion Comp.
fL = 0.01 to 0.1 GHz
fL = 0.1 to 0.4 GHz
fL = 0.4 to 1 GHz
fL = 0.01 to 0.1 GHz
fL = 0.1 to 0.4 GHz
fL = 0.4 to 1 GHz
fL = +25 dBm
dB
40
35
34
dB
35
25
24
dB
25
18
17
dB
45
35
34
dB
35
25
24
dB
20
14
13
dBm
+20
Input IP3
dBm
+30
* The M2EC specification limits apply at 0ºC to +50ºC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.